We teamed up with Treadwall™ to create some routes for their famous rotating walls.

Route 3 - Pinches route

You can make this route medium or hard.

Puffy yet fingery Stella pinches with knobs on them for thumbs and incut to flat hooded knob feet that you can twist to adjust positivity.

20 Handholds and 20 Footholds

Shaped by Ian Powell and Keith Dickey

Hardware recommended (not included): Bolts 20 x 1.5" 17 x 2", 3 x 2.5"; Screws 30 x 2", 10 x 2.5"

Attachment tools needed (North America): 5/16" hex wrench or hex bit; screw bit to fit whatever screws you use.

This route includes: KHKD008 (Stella Medium 2 - Puffy Pinches) KHKD011 (Stella Medium 4 - Puffy Pinches) and KHKD009 (Stella XS 2 - Hooded Feet)

If you want an easier version but still pinches email us and we'll pick other sets!

Set screws are not compulsory but are recommended to keep the holds from spinning over time, especially as most Treadwalls™ are only reset occasionally.

If you choose "Yes Hardware" you will get the above hardware plus an impact ready hex bit for the bolts and an impact ready torx bit that fits the included T-20 screws.

Buy individual routes or get the 4 route pack. Want something different? Email us at holds@kiltergrips.com for customized Treadwall™ packages to suit your needs.

See the walls: Treadwall™

Treadwall™ - Kilter Route 3 - Pinches